ποΈ Get SIP settings
Returns the SIP (Session Initiation Protocol) account settings.
ποΈ Set SIP settings
Configures the SIP (Session Initiation Protocol) account settings.
ποΈ Get SIP network mode
Returns the current network interface configuration used for SIP traffic.
ποΈ Set SIP network mode
Configures which network interface is used for SIP traffic when both Ethernet and Wi-Fi are active. DNS resolution is always performed via Wi-Fi.
ποΈ Get advanced call options
Returns the current state of advanced intercom call options:
ποΈ Set auto answer
Configures the auto answer feature.
ποΈ Set auto hang-up
Configures the auto hang-up feature. When enabled, the call is automatically ended after the door is opened via DTMF.
ποΈ Set auto pickup
Configures the auto pickup feature. When enabled, the device automatically answers incoming calls.
ποΈ Set camera
Enables or disables the device camera during calls.
ποΈ Set hooter settings
Configures the external speaker (hooter) β enables/disables it and sets the activation delay (0β60 seconds) after an incoming call starts.
ποΈ Set protect unlock
Configures the protect unlock feature. When enabled, a login dialog is shown to confirm identity before the door lock can be opened during a call.
ποΈ Get DTMF settings
Returns the DTMF key settings used for opening the door lock during a call.
ποΈ Set DTMF settings
Configures the DTMF key settings used for opening the door lock during a call.
ποΈ Get extended phone settings
Returns the extended phone settings. When enabled, incoming calls are simultaneously forwarded to up to four additional devices. The phone list may be empty; the maximum list size is 4.
ποΈ Set extended phone settings
Configures the extended phone settings. When enabled, incoming calls are simultaneously forwarded to up to four additional devices. The phone list may be empty; the maximum list size is 4.
ποΈ Get logical address
Returns the logical address of the device. The logical address defines the device's position in the building address hierarchy and is used for call routing.
ποΈ Set logical address
Configures the logical address of the device. The logical address defines the device's position in the building address hierarchy and is used for call routing.
ποΈ Get SOS button settings
Returns the SOS button configuration, including the target SIP number and whether the feature is enabled.
ποΈ Set SOS button
Configures the SOS button target number. Enabling this feature disables the multiple-concierge call feature if it is active.
ποΈ Returns multicast paging settings
Get multicast paging settings
ποΈ Configures multicast paging settings
Set multicast paging settings