ποΈ Get network settings
Returns Ethernet interface settings. If DHCP is enabled,
ποΈ Configure network settings
Configures Ethernet interface settings.
ποΈ Get device MAC address
Returns device MAC address
ποΈ Get current Wi-Fi settings
Returns Wi-Fi interface settings. If DHCP is enabled,
ποΈ Get current Wi-Fi mode
Returns the current Wi-Fi operating mode.
ποΈ Set Wi-Fi mode
Sets the Wi-Fi operating mode.
ποΈ Enable DHCP on Wi-Fi interface
Enables DHCP on the Wi-Fi interface and disables any static IP configuration.
ποΈ Set Wi-Fi static IP settings
Configures static IP settings for the Wi-Fi interface and disables DHCP.
ποΈ Get Wi-Fi module MAC address
Returns the MAC address of the Wi-Fi module.
ποΈ Get a list of available Wi-Fi networks
Get a list of available Wi-Fi networks
ποΈ Get information about the current Wi-Fi connection
Returns information about the current Wi-Fi connection.
ποΈ Connect to the specified Wi-Fi network
Connects to a Wi-Fi network using the provided SSID and password.
ποΈ Get list of saved Wi-Fi networks
Returns a list of previously saved Wi-Fi networks.
ποΈ Forget a saved Wi-Fi network
Removes a saved network identified by ssid or network_id query parameter.
ποΈ Get NTP settings
Returns the current NTP settings.
ποΈ Set NTP settings
Configures NTP settings.
ποΈ Get remote Link server settings
Returns the remote Link server configuration.
ποΈ Configure remote Link server
Configures remote Link server settings.
ποΈ Get management server settings
Returns the management server configuration.
ποΈ Set management server settings
Configures the management server connection.
ποΈ Get MQTT certificate information
Returns whether a custom certificate has been uploaded for the management server MQTT connection and its validity period.
ποΈ Upload MQTT certificate
Uploads a self-signed certificate for the management server MQTT connection.
ποΈ Remove uploaded MQTT certificate
Removes the uploaded certificate for the management server MQTT connection. The built-in default certificate will be used instead.
ποΈ Get management server debug information
Returns debug log entries for the management server MQTT connection. Only available when the MQTT protocol is enabled.
ποΈ Get Remote Management Software server configuration
Returns the Remote Management Software (RMS) server URL and password.
ποΈ Set Remote Management Software server
Configures the Remote Management Software (RMS) server URL and password.
ποΈ Get SIP network mode
Returns the current network interface configuration used for SIP traffic.
ποΈ Set SIP network mode
Configures which network interface is used for SIP traffic when both Ethernet and Wi-Fi are active. DNS resolution is always performed via Wi-Fi.
ποΈ Get DST settings
Returns Daylight Saving Time (DST) settings.
ποΈ Set Daylight Saving Time (DST) settings
Configures DST settings.
ποΈ Get NTP timezone
Returns the current timezone and the list of all available timezones.
ποΈ Set device timezone
Sets the device timezone. NTP must be enabled.