ποΈ Get current device brightness
Get current device brightness level. Min is 0 and max is 100
ποΈ Set current device brightness level
Set current device brightness level. Min is 0 and max is 100
ποΈ Get current drop call feature for individual panels
Get current settings for dropping call after second button press, this feature only for individual panels
ποΈ Set current drop call feature for individual panels
Set current settings for dropping call after second button press, this feature only for individual panels
ποΈ Set panel work mode to `Apartment` mode, this mode only available on individual panels
Set panel work mode to `Apartment` mode
ποΈ Get current BI key mapping version
Returns information about current key mapping type in BI panels
ποΈ Set BI key mapping type
Configures key mapping type
ποΈ Status of temperature sensor
Get status of temperature sensor
ποΈ Status of temperature sensor
Get status of temperature sensor
ποΈ Get panel work mode
Returns current panel work mode
ποΈ Set panel work mode to `Unit` mode
Set panel work mode to `Unit` mode.
ποΈ Set panel work mode to `Wall` mode
Set panel work mode to `Wall` mode.
ποΈ Get information about Enabling/Disabling SIP first account
Get information about Enabling/Disabling SIP first account
ποΈ Turns On/Off calls with SIP first account
Turns On/Off calls with Session Initiation Protocol (SIP) first account
ποΈ Get information about Enabling/Disabling SIP second account
Get information about Enabling/Disabling SIP second account
ποΈ Turns On/Off calls with SIP second account
Turns On/Off calls with Session Initiation Protocol (SIP) second account
ποΈ Get first account SIP Settings
Returns settings needed to configure calls with SIP first account.
ποΈ Set first account SIP Settings
Set first account SIP Settings
ποΈ Get second account SIP settings
Returns settings needed to configure calls with SIP second account.
ποΈ Set second account SIP Settings
Set second account SIP Settings
ποΈ Get concierge number settings
Configure concierge number settings.
ποΈ Set concierge number settings
Configure concierge number settings.
ποΈ Get dial timeout
Returns time interval after which the panel automatically ends an outgoing call if there is no answer
ποΈ Set dial timeout
A time interval after which the panel automatically ends an outgoing call if there is no answer
ποΈ Get talk timeout
Returns the time interval after which the panel automatically ends the outgoing conversation
ποΈ Set talk timeout
Set the time interval after which the panel automatically ends the outgoing conversation
ποΈ Get bidirectional video call settings
Enables user-to-user video communication during outgoing call. A black screen will be displayed if the called device has no camera.
ποΈ Setup bidirectional video call settings
Enables user-to-user video communication during outgoing call. A black screen will be displayed if the called device has no camera.
ποΈ Get auto dial feature settings
The function of automatic dialing after entering the number digits specified in the `digit_count` param
ποΈ Set auto dial feature settings
The function of automatic dialing after entering the number digits specified in the `digit_count` param
ποΈ Get auto hung up settings
Automatically end the call after opening the door with exit button if enabled
ποΈ Set auto hung up feature settings
Automatically end the call after opening the door with exit button if enabled
ποΈ Get incoming call settings
Configure incoming call settings.
ποΈ incoming call settings
Configure incoming call settings.
ποΈ Get camera video resolution
Returns camera video resolution
ποΈ Set camera video resolution
Set video resolution
ποΈ Get payload codec information
Returns information about video Real-time Transport Protocol (RTP) profile. It specifies the details of media encoding, such as signal sampling rate, frame size and timing
ποΈ Set payload codec
Configure video Real-time Transport Protocol (RTP) profile. It specifies the details of media encoding, such as signal sampling rate, frame size and timing
ποΈ Get RTSP stream username/password
Returns **username** and **password** used to access panel's camera RTSP stream
ποΈ Set RTSP stream username/password
Set **username**, **password** and audio enabled used to access panel's camera RTSP stream
ποΈ Get speaker volume level
Returns speaker volume level
ποΈ Set speaker volume level
Set speaker volume level
ποΈ Get LED auto mode settings
Returns LED auto mode settings
ποΈ Set LED auto mode
Turn On/Off LED auto mode
ποΈ Get infrared motion detector settings
The endpoint is deprecated, use `GET /device/proximity/sensor`
ποΈ Set infrared motion detector settings
The endpoint is deprecated, use `POST /device/proximity/sensor`
ποΈ Get proximity sensor settings
Returns proximity sensor setting
ποΈ Set proximity sensor settings
- Configures proximity sensor settings. There are two modes: *adaptive* - sensor adapts to walls and obstacles around
ποΈ Send data from camera about license plate number
Allows to send data from camera to device, so device will be able to process data, and open lock. File is required to contain json object with 'plateUTF8' string value. Required file format is **json**