ποΈ Show message in the desktop notifications list
Show message in the desktop notifications list
ποΈ Update message in the desktop notifications list by uid
Update message in the desktop notifications list by uid
ποΈ Get all messages from the desktop notifications list
Returns list of messages with pagination options
ποΈ Delete all messages from the desktop notifications list
Delete all messages from the desktop notifications list by uid
ποΈ Create/Update messages in the desktop notifications list from Link
This request is used by Link management system to create or update messages which will be displayed on the main screen by `link_id`
ποΈ Delete messages in the desktop notifications list from Link
This request is used by Link management system to delete messages by `link_id`
ποΈ Set a password for GUI settings access
Set a password for GUI settings access
ποΈ Get current BI key mapping version
Returns information about current key mapping type in BI panels
ποΈ Set BI key mapping type
Configures key mapping type
ποΈ Get desktop toolbar text
Returns a text displayed in the toolbar on the main screen, for example, address of the building where the panel is located
ποΈ Get weather settings
Returns weather setting displayed on the main screen. Device uses [Accuweather API (https://developer.accuweather.com/) to get weather information.
ποΈ Set weather settings
Set weather settings displayed on main screen. Device uses [Accuweather API](https://developer.accuweather.com/) to get weather information.
ποΈ Get wallpaper image path
Returns wallpapers image URI which can be used to retrieve file.
ποΈ Set wallpaper
Set main screen wallpaper
ποΈ Reset wallpaper to default
Reset wallpaper to default
ποΈ Set custom desktop button icon
Set main screen icon image for proper button
ποΈ Reset desktop icon to default
Resets desktop app icon to default
ποΈ Get current time, timezone and the list of supported timezones
Returns current timestamp, timezone and the list of supported timezones
ποΈ Set time and timezone
Sets the time and timezone manually. NTP must be disabled. To disable NTP use `POST /network/ntp`.
ποΈ Status of temperature sensor
Get status of temperature sensor
ποΈ Status of temperature sensor
Get status of temperature sensor
ποΈ Get auto hung up settings
Automatically end the call after opening the door with exit button if enabled
ποΈ Set auto hung up feature settings
Automatically end the call after opening the door with exit button if enabled
ποΈ Get incoming call settings
Configure incoming call settings.
ποΈ incoming call settings
Configure incoming call settings.
ποΈ Get proximity sensor settings
Returns proximity sensor setting
ποΈ Set proximity sensor settings
- Configures proximity sensor settings. There are two modes: *adaptive* - sensor adapts to walls and obstacles around
ποΈ Create Apartment Entity
Creates Apartment Entity. The `uid` value returned in the response can be used as the `apartment-uid` parameter in next requests:
ποΈ Get Apartment Entity detailed information
Returns Apartment Entity detailed information.
ποΈ Update Apartment Entity information
Update Apartment Entity base information
ποΈ Delete Apartment Entity
Delete Apartment Entity and removes detaches all identifiers attached to this apartment
ποΈ Update Apartment Entity route image
- Upload Apartment Entity route image
ποΈ Delete Apartment Entity route image
- Delete Apartment Entity route image
ποΈ Add user to apartment
Allows to add user to apartment
ποΈ Detach user from apartment
Allows to detach user from apartment
ποΈ Download all apartment routes
- Returns a zip archive containing a list of apartment route files
ποΈ Imports apartment route files
- Imports all apartment route image files from zip archive. The device optimizes the images. The approximate optimization time is 1s for 1 image.
ποΈ Get Apartments list
Return Apartments entities detailed list with used pagination, filter and sort options
ποΈ Delete multiple apartment items
Delete multiple apartment items by their IDs
ποΈ Get multiple Apartment Entities with `link_id`
Get multiple Apartment Entities with `link_id`.
ποΈ Create/update multiple Apartment Entities with `link_id`
Create/update multiple Apartment Entities with `link_id`.
ποΈ Delete multiple Apartment Entities with link_id
Delete multiple Apartment Entities with `link_id`.
ποΈ Attach identifier to apartment
Create a relation between the identifier and the apartment entities.
ποΈ Detach identifier from apartment
Delete a relation between the identifier and the apartment entities
ποΈ Add or update image profile photo
- Add or update image profile photo, used for apartment book in the web/GUI. Supports any image file type in any resolution, after upload any file scales to 500x500 px max.
ποΈ Get Apartment book feature status
GET apartments phone book feature status.
ποΈ Enable/Disable Apartment book display in the GUI
Set apartments phone book feature status.
ποΈ Creates user entity
Creates user entity
ποΈ Get users list
Returns users list with options could be used to sort and filter them
ποΈ Delete multiple user items
Allows making massive user deletion by their IDs
ποΈ Get multiple User Entities with link_id
Returns multiple User Entities with link_id with filter, sort and pagination options.
ποΈ Delete multiple User Entities with link_id
Delete multiple User Entities with `link_id`.
ποΈ Create/update multiple User Entities with `link_id'
Create/update multiple User Entities with `link_id`.
ποΈ Attach timeprofile to user
Allows to attach timeprofile to user
ποΈ Detach TimeProfile from user
Allows to detach timeprofile from user
ποΈ Attach identifier to user
Allows to attach identifier to user
ποΈ Detach shared identifier from user
Allows to detach shared identifier from user
ποΈ Detach identifier from user
Allows to detach identifier from user
ποΈ Available device auth factors
Used to get available auth factors. AV-08FB and BI panels do not support input_code
ποΈ Get Wiegand settings
Returns Wiegand input and output settings.
ποΈ Setup Wiegand input/output
Configures Wiegand input/output.
ποΈ Get global access settings
Used to get information about current global access settings
ποΈ Configures global access settings
Used to set information about current global access settings.
ποΈ Get User Entity
Returns detailed info about User
ποΈ Delete User Entity
Deletes User Entity
ποΈ Update User Entity
Updates User Entity `has_dublicates` - if user with the same name already exists, `has_dublicates` will be in true condition `To identify users, use `info` field
ποΈ Get master access code
Get master access code and feature status. Available only on panels with keyboard.
ποΈ Set master access code
Set master access code and feature status. Available only on panels with keyboard.
ποΈ Gets the type of Wiegand used for internal card reader.
Gets the type of Wiegand used for internal card reader.
ποΈ Setup the type of Wiegand used for internal card reader.
Setting up the type of Wiegand used for internal card reader.
ποΈ Get master card number
Get master card number.
ποΈ Set master card number
Set master card number.
ποΈ Toggle outdated identifiers clearing
Get current state of clearing outdated identifiers. After 7 days after expiring outdated identifiers will be automatically cleared from device.
ποΈ Toggle outdated identifiers clearing
Get current state of clearing outdated identifiers. After 7 days after expiring outdated identifiers will be automatically cleared from device.
ποΈ Status of the contacts of the exit button.
Returns status of the contacts of the exit button.
ποΈ Status of the contacts of the exit button.
Returns status of the contacts of the exit button.
ποΈ Get face recognition settings
Get face recognition settings. This feature is available on devices with face recognition.
ποΈ Set face recognition settings
Set face recognition settings. This feature is available on devices with face recognition. A reboot is required after changing the face recognition model
ποΈ Get QR recognition settings
Returns QR feature setting.
ποΈ Set QR recognition settings
Set QR recognition settings
ποΈ Get time after opening until locking
Returns time for which the relay contacts will be closed after opening.
ποΈ Set time after opening until locking
Setup time for which the relay contacts will be closed after opening.
ποΈ Get delay before unlocking
Time delay before panel relay contacts will be open
ποΈ Set delay before unlocking
Time delay before panel relay contacts will be open
ποΈ Get DTMF code for door lock
Returns DTMF code used for opening lock during call
ποΈ Set DTMF code for door lock
Configure DTMF code used for opening lock during call
ποΈ Open lock via HTTP
Open lock and trigger 'access allowed' event via HTTP. In logs will be described as 'Lock is opened by API call'
ποΈ Open the lock from remote server
Opens lock and trigger 'access allowed' event via HTTP (for Remote Access Server needs). In logs will be described as 'Lock is opened by Remote access server'.
ποΈ Deny access from remote server
Show 'access denied' via HTTP (for Remote Access Server needs). In logs will be described as 'Access denied by Remote access server'
ποΈ Get the floor number for lift module
This endpoint is deprecated, use `GET /access/general/elevator/settings`
ποΈ Set the floor number for lift module
This endpoint is deprecated, use `GET /access/general/elevator/settings`
ποΈ Get the lift settings
Returns the number of the floor on which the panel is installed for identification by the
ποΈ Set the lift settings
Configures the number of the floor on which the panel is installed for identification by the
ποΈ Get KONE lift settings
Returns KONE lift adapter, required for interaction with KONE module
ποΈ Set KONE lift settings
Configures KONE lift adapter, required for interaction with KONE module
ποΈ Get debug info about interaction with KONE lift module
Returns debug info when KONE lift module is enabled
ποΈ Create Access Rule
Creates Access Rule Entity.
ποΈ Get All Access Rules
Returns detailed info about all Access Rule
ποΈ Get KONE building topology
Returns available area in the building.
ποΈ Get Access Rule Entity
Returns detailed info about Access Rule
ποΈ Update Access Rule Entity
Updates Access Rule Entity
ποΈ Delete Access Rule
Deletes Access Rule Entity
ποΈ Get All Access Rules attached to User
Returns detailed info about all Access Rule attached to user
ποΈ Attach access rule to user
Attaches access rule to user.
ποΈ Detach access rule from user
Detaches access rule from user
ποΈ Get BOND lift settings
Returns BOND lift settings
ποΈ Set BOND lift settings
Configures BOND lift adapter, required for interaction with BOND module.
ποΈ Create Access Zone
Creates Access Zone Entity.
ποΈ Get All Access Zones
Returns detailed info about all Access Zones
ποΈ Delete multiple Access Zone items
Delete Access Zone items by uid
ποΈ Get Access Zone Entity
Returns detailed info about Access Zone
ποΈ Update Access Zone Entity
Updates Access Zone Entity
ποΈ Delete Access Zone
Deletes Access Zone Entity
ποΈ Attach access zone to entity, e.g. identifier or call number
Attaches access zone to identifier or call number.
ποΈ Detach access zone from entity, e.g. identifier or call number
Detaches access zone from identifier or call number.
ποΈ Get list of entities connected with BOND access zones
Returns list of entities connected with BOND access zones
ποΈ Get monitor security mode feature status
If the feature is enabled, then when the card brought to the reader the alarm will be automatically turned on/off on the corresponding monitor.
ποΈ Turn on/off monitor security mode
If the feature is enabled, then when the card brought to the reader the alarm will be automatically turned on/off on the corresponding monitor.
ποΈ Create Identifier Entity
Create Identifier Entity. You can create identifiers with the next types:
ποΈ Get Identifier Entity
Returns detailed info about Identifier
ποΈ Update Identifier Entity
Update Identifier Entity
ποΈ Delete Identifier Entity
Delete Identifier Entity
ποΈ Get identifiers list
Returns identifiers list with options could be used to sort and filter them
ποΈ Delete multiple Identifier items
Delete multiple Identifier items
ποΈ Get multiple Identifier items with link_id
Get multiple Identifier items with `link_id`.
ποΈ Update multiple Identifier items by link_id
Create or Update multiple Identifier items.
ποΈ Delete multiple Identifier items by link_id
Delete multiple Identifier items by `link_id` param.
ποΈ Create Identifier Entity from uploaded image file
Creates Identifier Entity from uploaded image file.
ποΈ Get png representation of the stored QR identifier
Returns png representation of the stored QR identifier
ποΈ Reset Identifier left passes to max
Reset left passes to max, if there is a restriction on the number of passes specified in the identifier settings
ποΈ Attach Time Profile to Identifier
Attach Time Profile rule to Identifier
ποΈ Detach Time Profile from identifier
Detach Time Profile from Identifier
ποΈ Create Time Profile Entity
Create Time Profile Entity. It describes access rules which can be attached to identifiers.
ποΈ Get Time Profile Entity
Returns Time Profile Entity
ποΈ Update Time Profile Entity
Update Time Profile Entity
ποΈ Delete Time Profile Entity
Delete Time Profile Entity
ποΈ Get Time Profiles list
Returns Time Profiles list
ποΈ Delete multiple Time Profile items
Delete Time Profile items by uid
ποΈ Get multiple Time Profile items with link_id
Get multiple Time Profile items with `link_id`.
ποΈ Update multiple Time Profile items by link_id
Create or Update multiple Time Profile items.
ποΈ Delete multiple Time Profile items by link_id
Delete multiple Time Profile items by `link_id` param. This request is used by `Link` management system to remove Time Profiles from panel.
ποΈ Get Free access Time Profile
- Get Free access Time Profile
ποΈ Create Free access Time Profile
- Create Free access Time Profile
ποΈ Get status of the parking terminal feature.
- Getting status of parking terminal feature.
ποΈ Set status of the parking terminal feature.
Opens first relay if access granted, and second if access denied. Supports multifactor mode
ποΈ Create/Update multiple call forward rules with link_id
Create/Update multiple call forward rules
ποΈ Delete multiple call forward rules with link_id
Delete multiple call forward rules
ποΈ Get list of events which can be used to trigger sending photo from camera to Link
Returns list of events which can be used to trigger sending photo from camera to Link
ποΈ Set list of events which can be used to trigger sending photo from camera to Link
Set list of events which can be used to trigger sending photo from camera to Link
ποΈ Take snapshot from IP camera
Takes snapshot from device camera and returns image file in `webp` format
ποΈ Get syslog server settings
Returns settings used to send logs to syslog server [RFC5424](https://tools.ietf.org/html/rfc5424)
ποΈ Set syslog settings
Set settings used to send logs to syslog server [RFC5424](https://tools.ietf.org/html/rfc5424)
ποΈ Download syslog
Returns zipped syslog
ποΈ Clear syslog
Clear syslog
ποΈ Change admin password
Change admin password
ποΈ Change manager password
Change manager password
ποΈ Get the type of lock used
Gets the type of lock used:
ποΈ Set the type of lock used
Set the type of lock used:
ποΈ Start emergency mode and open the locks
Open the locks in emergency mode for the specified time, unlock time must be in range [1 - 604800] seconds
ποΈ Cancel emergency mode and close the locks
Cancel emergency mode and close the locks